*Large capacity: The plate has a high content of effective
substances, and the glass wool composite separator has sufficient
acid retention.
*Long cycle life: the pole plates are made of multi-element alloys,
resistance bottom, strong conductivity, corrosion resistance,
ensuring the use of batteries
*Strong dry charge performance: using advanced technology, the
plate is specially treated and dried at low temperature, and the
dry charge performance (ready-to-use capacity) is strong.
> Specification
| Battery Model No. | 12N3-BS |
| Nominal Voltage | 12V |
| Capacity(10HR/25℃) | 3Ah |
| Dimension | Length | 98±2mm |
| Width | 57±2mm |
| Height | 108mm |
| Approx. Weight | 1.1kg |
| Operating temperature range | -20℃-50℃(-4℉-122℉) |
| Standard charging method(25℃) | Current | 0.9A |
| Time | 5-10h |
| Quickly charging method(25℃) | Current | 4.5A |
| Time | 1H |
| Terminal Material | Lead |
| Container Material | ABS |
> Structure and composition
| Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
| Raw material | lead dioxide | lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
> Production process
How to maintain the motorcycle battery
1. Check the liquid level regularly, if the liquid level is below
the horizontal line. Please fill up to the upper level with
distilled water or purified water in time. Never add sulfuric acid
to dissolve waves. After adding liquid, the locomotive should be
run for a period of time to make the electrolyte mixed evenly:
2. If the motorcycle battery has no electrolyte. Or the motorcycle
battery is short of about half of the electrolyte or overcharged,
the life of this battery is basically terminated, even if it can be
used after adding the electrolyte, the time will not be too long. .
If the battery is in use, there is no battery solution. It means
that if the charging current is too large, the capacity and life of
this kind of dried electro-hydraulic battery will be sharply
reduced, and it will even fail directly. .If the battery power is
insufficient, please remove the battery to recharge it in time. If
the battery is not charged in time, used for a long time without
full charge, etc., it will cause the battery to vulcanize, reduce
the battery capacity and shorten the life, and even the battery
cannot be used.
3. It should be noted that the battery has been in the state of
power for a long time,-part of the active material lead dioxide
(pbo2) will always become dense lead sulfate (pbso4) and cannot be
reduced to lead dioxide (pbo2), resulting in a decrease in capacity
and a shortened life: If the battery is not charged for a long time
after being discharged, the lead dioxide (pbo2) will become dense
lead sulfate (pbso4) and then can no longer be reduced to lead
dioxide (pbo2). This will lead to the end of battery life.
